Rako RLED20+CC4 Wireless 20W RGBW Constant Current Dimming Module

Description

The Rako RLED20+CC4 is a wireless (RGBW) 20W/channel constant current dimming LED module, suitable for ceiling or cupboard mounting.

• A compact 4 channel 20W/channel constant current LED module with in-built wireless receiver.
• For control of 3 channel constant current LED fittings with selectable outputs of 350, 500, 600 and 700mA.
• When used with 4 colour fittings each colour is allocated a channel and can be individually adjusted allowing complete colour mixing. Simple colour cycling is started/stopped using the fade up/fade down commands.
• Controlled from any Rako wireless device, for example the RCM/RNC push button wireless wall-plates.

Designed for use with 4 channel constant current LED fittings. Maximum wattage of 20W with a forward voltage range of 3-45V (equates to 13 x 1W LEDs per channel). Requires a suitable external DC power supply such as the Rako RAPSU48. Selectable current ratings of 350, 500, and 700mA via jumper connectors.

Manual On/Off control is available using the set-up button for testing without the module needing to be addressed. Programmed using either an RCM wall-plate or Rasoft Pro software. The RLED20+CC4 stores the House, Room and Channel address plus 16 preset Scene levels in a non-volatile memory. The RLED20+CC4 can be controlled from any Rako transmitter such as RCM/RNC keypads, RA/RTC Bridges and RAPIRs. The module can be controlled by a wired system via a WK-HUB.

Requires a suitable external power supply such as the Rako RAPSU48

For install enquiries contact us on:

    [email protected]

    01189 882294

or on our website Live Chat

Specification

Input supply: 48V DC max

Weight: 178g

Housing: UL V0 ABS

Climate Range:
Temperature +2C to +40C
Humidity +5% to 95% non condensing

Connections:
2 way terminals for D.C. supply
8 way screw terminals for load connections

Protection: Reverse polarity input protection

Load Types: 4 Channel Constant Current LED Fittings

Minimum Load: 3W

Maximum Load: 20W/channel

Terminal Sizes: 4mm2

Standards: 
Emissions - EN61000-6-3: 2007
Immunity - EN61000-6-1: 2007

Communication: Rakom coded fm radio, 433.9MHz

Memory: Flash memory (non volatile)

*Requires a suitable external power supply such as the Rako RAPSU48

Dimensions

Product dimensions: W.46mm x D.172mm x H.40mm

Downloads

• Rako RLED20+CC4 Data Sheet PDF
• Rako RLED20+CC4 Installation Instructions PDF

Delivery and warranty

Delivery usually in 1-2 weeks

  Supplied with a 3 year 'return to base' warranty

About the manufacturer

Made in Britain, Rako smart lighting controls and systems are easy to use, easy to install & cost effective. Leading the way in providing state-of-the-art digital dimming technology, Rako provides innovative solutions for both wired systems (perfect for new build projects), wireless systems (ideal when it isn't possible to replace wiring) or a hybrid of both. 

Perfect for modern living, Rako systems can be easily controlled with tablets, smartphones and smartwatches. Set up lighting scenes that  allow you to select a pre-set lighting scene or change the mood lighting at the touch of a button. Rako offer a full suite of control panels, cover plates, control modules and dimmers, hubs and interfaces. If you're looking for fully integrated smart home mood lighting systems, you're in the right place.

Rako won the Smart Building Awards for Best Lighting Control product and the CEDIA EMEA Award for Best New Hardware for 2022.

Got a question? Email us or call 01189 882294