Rako RK MOD Wireless Wall Plate Control Module

Description

The Rako RK-MOD wireless push button wall plate with up to 12 push buttons. Customisable and programmable via NFC communication

• A wireless push button module that can accommodate up to 12 push buttons configurable via NFC.
• Powered by lithium battery allows the RK-MOD to be mounted anywhere without the need to run cables.
• Rako RK-MOD are available hand finished in the following:
  - Satin Chrome (SC)
  - Polished Chrome (PC)  
  - Antique Brass (AB)
  - Polished Brass (PB)
  - Matt Bronze (BM)
  - Matt White (WH)
  - Matt Black (MB)

The RK-MOD-xxx-x uses three different button sizes across a range of keypad layouts. This offers a truly flexible range of designs to suit all your lighting control requirements including: Curtain, Blind, Audio, Multi and Single Room layouts.

A RAMPI or RK-HUB and Rasoft Pro programming software is required for setup and configuration of the RK-MOD-xxx-x. Once addressed it is possible to control any Room/Channel in the system, sending commands to each including:
- Scene selection
- Scene toggle
- Level toggle
- Room/Channel raise & lower
- Macro start/stop/control
- House Master controls

Rako’s coded radio transmission eliminates the need for any data cables ensuring the system can be installed with minimum fuss or disruption.

Wired version available.

Customisable button engravings available, contact us for details.

For install enquiries contact us on:

    [email protected]

    01189 882294

or on our website Live Chat

Specification

Dimensions:
Control Panel: 86x86x25mm
Surround: 88x88x6mm

Fixing:
Flush mounting into standard UK single gang box (min 25mm deep)

Input supply: 
6V DC - 2x 3V Lithium coin cell CR2016 (remote power supply version available)

Weight: 
95g

Battery Life:
Greater than 3 years

Climate Range:
Temperature +2C to +40C
Humidity +5% to 95% non condensing

Communication: 
433.9MHz coded FM radio 
Programming via NFC

Standards: 
Emissions - EN61000-6-3 : 2007
Immunity - EN61000-6-1 : 2007

Memory:
Flash memory (non volatile)
Firmware upgrades via RASOFT programming software

Dimensions

Product dimensions: W.86mm x D.25mm x H.86mm

Downloads

• Rako RK-MOD Data Sheet PDF
• Rako RK-MOD Install Instruction PDF
• Rako RK-MOD Modular Plate Care Guide PDF

Delivery and warranty

Delivery usually in 1-2 weeks

  Supplied with a 3 year 'return to base' warranty

About the manufacturer

Made in Britain, Rako smart lighting controls and systems are easy to use, easy to install & cost effective. Leading the way in providing state-of-the-art digital dimming technology, Rako provides innovative solutions for both wired systems (perfect for new build projects), wireless systems (ideal when it isn't possible to replace wiring) or a hybrid of both. 

Perfect for modern living, Rako systems can be easily controlled with tablets, smartphones and smartwatches. Set up lighting scenes that  allow you to select a pre-set lighting scene or change the mood lighting at the touch of a button. Rako offer a full suite of control panels, cover plates, control modules and dimmers, hubs and interfaces. If you're looking for fully integrated smart home mood lighting systems, you're in the right place.

Rako won the Smart Building Awards for Best Lighting Control product and the CEDIA EMEA Award for Best New Hardware for 2022.

Got a question? Email us or call 01189 882294