LLD Point Submersible L Underwater Pool IP68 LED Adjustable Spot Light

Description

The largest in the family, the LLD Point Submersible L Spot Light is a discreet adjustable perminent immersion projector with a maximum installation depth of 3m. With a diameter of just under 7cm & an IP68 rating makes Point Submersible M underwater spotlight the perfect solution for lighting swimming pools, fountains and water features.

The Point Submersible M uses an energy efficient 6W LED light source with a choice of beam angles in 18°, 30° or 46°. Available in constant current or 24VDC constant voltage versions, and with a choice of 2700K, 3000K or 4000K light temperature. Constructed from AISI 316L stainless steel body with satinized steel bracket & a tempered transparent glass lens.

Supplied with a 8m neoplene cable. Can be fixed to the floor, ceiling or wall with the included fixing bracket or into the ground with the optional 200mm long spike.

Other sizes and IP67 spot version available - see below. View the full LLD Light catalogue in the downloads tab.

Drivers not included for 1000mA constant current or 24VDC constant voltage versions. This fitting is compatible with non dim, TRIAC dim, push dim, 1-10V dim and DALI dim drivers.

Delivery usually within 2 weeks

- Our Top Tips -

• Point SUB is an IP68 submersible light which can be permanently underwater and is designed for ponds, swimming pools, fountains and water features.
• However this of course can be used above ground and is ideal for areas that might get flooded. Make sure to use IP68 cable joints to maintain the IP rating and warranty.
• Drivers need to be accessible and we advise not burying them under ground in case maintenance is required.
• The Point L Submersible is suitable for larger ponds, swimming pools and water features up to 10M.

Specification

IP68 fully submersible
Class III
Max installation depth: 3m
8m neoplene cable

Constant current version - wired in series
1000mA driver IP rated required

24VDC constant voltage version - wired parallel

24VDC driver required 

CCT | Lumens
2700°K | 1050lm
3000°K | 1120lm
4000°K | 1206lm

Beam angle: 18° | 30° | 46°

Optional spike (PI002): H.200mm 21.5x21.5mm

Lamp type: LED 12W Lifespan 50,000hrs

Dimensions

Product dimensions: D.88mm x H.113mm x Diameter.69mm

Downloads

• point-sub-IP68-datasheet2.pdf
• point-sub-IP68-install2.pdf
• Info on WP Water Protection System PDF
• LLD Light 2021 Catalogue PDF
• LLD Light 2021 News Catalogue PDF

Delivery and warranty

Delivery usually within 2-3 weeks

Supplied with a 2 year warranty covering manufacturing and/or design defects. The warranty does not cover:

• damage caused by transport
• the use of products in unsuitable environmental conditions
• non-standard product use or stress including under/over voltage
• damage caused by negligence or lack of maintenance
• damage caused by the use of power supplies not provided or indicated by LLD Light
• repair attempts or tampering performed by unauthorised staff

About the manufacturer

With a heritage in nautical lighting, it's no surprise that LLD Light have evolved to become a prominent manufacturer of contemporary architectural indoor and outdoor lighting. Passionate about continual research and innovation, LLD combine innovative Italian design with the highest quality locally sourced materials. Each LLD light fitting, electronics and all, is produced in Vicenza - a true example of Made In Italy. 

Our LLD Light edit below showcases the most popular products in the range.

  Browse the full LLD 2021 catalogue
  Browse the full LLD News 2021 catalogue

For prices on any product that isn't shown below please contact us.

 

We're especially excited about their range of contemporary IP rated outdoor lighting - from adjustable spike spots and bollards, to wall lights and IP68 submersible underwater lights. Most are available in sleek and modern stainless steel, black or white, as well as COR-TEN stable rusted or in green to truly camouflage with the outdoor environment.

Got a question? Email us or call 01189 882294